Drylining Peterborough

Drylining Peterborough FAQ

What materials are used for dry lining?

Short answer: The main material used for dry lining is plasterboard, which consists of a gypsum core covered with durable paper. Standard plasterboard is suitable for many bedrooms, living rooms and offices. Moisture-resistant boards are commonly used in kitchens, bathrooms and utility areas, while fire-resistant boards provide additional protection in garages, stairways and other regulated locations. Acoustic plasterboard can help reduce sound transmission, and insulated plasterboard improves thermal performance. Boards may be fixed directly to masonry using drywall adhesive or attached to timber battens or lightweight metal studs with screws. Other materials include jointing tape, joint filler, finishing compound, corner beads and fixings. Depending on the project, insulation slabs, vapour control layers, membranes, sealants and acoustic materials may also be installed behind the plasterboard.

Helpful context

The right system depends on the wall condition, the finish you want, and whether there are services or awkward areas to work around.

Need it done properly?

If you are planning dry lining in Cambridgeshire, use this answer as a starting point, then get a site-specific quote from a contractor who can check the wall condition, materials and finish on site.

Get a Free Quote

Useful service links

For a proper quote, we will look at wall condition, moisture, access, insulation, and the finish you want. That keeps the price accurate and avoids surprises later.

In Peterborough & Cambridgeshire

Dry lining in Peterborough and across Cambridgeshire typically costs £25–£45 per m² for residential work and £22–£40 per m² for commercial projects — roughly 10% below the UK national average. Local day rates for dry lining operatives run £160–£220, compared with £250–£350 in London and the South East. We are based in Peterborough and cover all of Cambridgeshire, including Stamford, March, Wisbech, St Neots, Huntingdon, Ely, Whittlesey, Bourne and Chatteris.

Older Cambridgeshire properties — particularly Victorian terraces in PE1–PE4, 1930s semis in Orton and Dogsthorpe, and stone cottages in Stamford — often have solid walls. Insulated plasterboard (PIR-backed) typically costs £35–£55 per m² installed and is the most cost-effective route to improving wall U-values. Many homes in the Fens (March, Whittlesey, Chatteris) sit below the water table and are at risk of salt damp, which must be treated before any dry lining.

Local suppliers include Travis Perkins (Peterborough, St Neots), Jewson (Stamford, Huntingdon) and independent merchants in Wisbech. Standard 12.5mm British Gypsum Gyproc board, 15mm FireLine, and Knauf Soundboard are all held in regional stock with 24–48 hour lead times. Material prices vary by less than 5% across the UK, so local supply is rarely a cost driver — labour and access are.

Building control in Cambridgeshire is administered by Cambridgeshire County Council and the unitary City of Peterborough. Domestic alterations typically attract building control fees of £150–£400. Under Approved Document B, fire-rated plasterboard (12.5mm pink FireLine or 15mm Fire Board) is required on escape routes, between garages and living spaces, in loft conversions, and in most commercial partitions. Approved Document E requires acoustic plasterboard (SoundBloc or similar, 40+ dB) between dwellings and between commercial units.

Drylining Peterborough has been trading since 2014. The team is CSCS-registered, supervisors hold SMSTS/SSSTS, and we carry £1 million public liability and £10 million employer’s liability insurance as standard. We have completed over 400 dry lining, plastering and partitioning projects across Cambridgeshire and the Fens, with current typical lead times of 1–2 weeks from quote acceptance. Free, no-obligation site visits and itemised written quotes anywhere in PE1–PE29.