Drylining Peterborough FAQ

How much does dry lining cost in Peterborough?

Short answer: The cost of dry lining in Peterborough depends on the size of the room, the condition of the existing walls and the installation method required. A straightforward plasterboard installation may cost around 'a325 to 'a345 per square metre, including standard materials and labour. Prices can increase if the project requires insulated plasterboard, moisture-resistant boards, soundproofing materials, metal framing or extensive preparation work. Ceilings, high walls and awkward areas may also cost more because they take longer to complete. Some contractors price smaller jobs by the day rather than by the square metre. To get an accurate estimate, arrange a site visit and request a written quotation that clearly separates labour, materials and waste removal. Comparing several local quotes can help you understand the likely cost of your particular project.

Helpful context

For an accurate price, a site visit is needed because room size, board type, access, and prep all affect the final figure.

Need it done properly?

If you are planning dry lining in Cambridgeshire, use this answer as a starting point, then get a site-specific quote from a contractor who can check the wall condition, materials and finish on site.

Get a Free Quote

For a proper quote, we will look at wall condition, moisture, access, insulation, and the finish you want. That keeps the price accurate and avoids surprises later.

In Peterborough & Cambridgeshire

Dry lining in Peterborough and across Cambridgeshire typically costs £25–£45 per m² for residential work and £22–£40 per m² for commercial projects — roughly 10% below the UK national average. Local day rates for dry lining operatives run £160–£220, compared with £250–£350 in London and the South East. We are based in Peterborough and cover all of Cambridgeshire, including Stamford, March, Wisbech, St Neots, Huntingdon, Ely, Whittlesey, Bourne and Chatteris.

Older Cambridgeshire properties — particularly Victorian terraces in PE1–PE4, 1930s semis in Orton and Dogsthorpe, and stone cottages in Stamford — often have solid walls. Insulated plasterboard (PIR-backed) typically costs £35–£55 per m² installed and is the most cost-effective route to improving wall U-values. Many homes in the Fens (March, Whittlesey, Chatteris) sit below the water table and are at risk of salt damp, which must be treated before any dry lining.

Local suppliers include Travis Perkins (Peterborough, St Neots), Jewson (Stamford, Huntingdon) and independent merchants in Wisbech. Standard 12.5mm British Gypsum Gyproc board, 15mm FireLine, and Knauf Soundboard are all held in regional stock with 24–48 hour lead times. Material prices vary by less than 5% across the UK, so local supply is rarely a cost driver — labour and access are.

Building control in Cambridgeshire is administered by Cambridgeshire County Council and the unitary City of Peterborough. Domestic alterations typically attract building control fees of £150–£400. Under Approved Document B, fire-rated plasterboard (12.5mm pink FireLine or 15mm Fire Board) is required on escape routes, between garages and living spaces, in loft conversions, and in most commercial partitions. Approved Document E requires acoustic plasterboard (SoundBloc or similar, 40+ dB) between dwellings and between commercial units.

Drylining Peterborough has been trading since 2014. The team is CSCS-registered, supervisors hold SMSTS/SSSTS, and we carry £1 million public liability and £10 million employer’s liability insurance as standard. We have completed over 400 dry lining, plastering and partitioning projects across Cambridgeshire and the Fens, with current typical lead times of 1–2 weeks from quote acceptance. Free, no-obligation site visits and itemised written quotes anywhere in PE1–PE29.